VIBRATOR INSTRUCTION GUIDE

Scroll bellow to find your specific vibrators instruction manual, charge and usage time. If you have any further enquires please don't hesitate to send us a message. 

MY ILO DUO

1. Clean the duo before use with ilo’s vibrator cleaner.

2. Press and hold the on/off button for 5 consecutive seconds to turn on. Click the start button to change the vibrating and sucking patterns, 10 patterns will cycle. Massage and stimulate.

3. Press the on/off button for 3 consecutive seconds to turn off. 

4. Wash the duo after use with ilo’s vibrator cleaner.

Charging time: 1.5 hours

Usage time: 2 hours

MY ILO BLENDED

1. Clean Blended before use with My ilo’s vibrator cleaner. 

2. Press and hold, for 3 continuous seconds, buttons on the bottom of the device to initiate their function. A light will illuminate underneath the button when the function has been correctly turned on and is ready for use. Press the same button again once to start the function.

3. The first button initiates the clitorial pulsing function. The second button initiates the g-spot stimulating function. The third button initiates the 10 vibration patterns.

4. Now that the product is on to add second and/or third function simply press the button for 1 second. Do not continue to hold down the already initiated functions. 

5. To change vibration patterns and intensities, press activated buttons for 1 second.

6. Massage and stimulate. 

7. Press and hold each activated button for 3 continuous seconds to turn the functions off. The light will disappear when the device is correctly turned off. 

8. Wash Blended after use with My ilo’s vibrator cleaner. 

Charging time: 1 hour

Usage time: 3 hours

MY ILO RING

1. Clean the ring before use with ilo’s vibrator cleaner.

2. Press and hold the on/off button for 3 consecutive until light has flashed. Immediately press the on/off button again to turn on device. Press again to change vibration patterns, 8 vibrating patterns will cycle. Massage and stimulate.

3. Press the on/off button for 3 consecutive seconds to turn off.

4. Wash the ring after use with ilo’s vibrator cleaner.

Charging Time: 40 minutes

Usage Time: 1 hour

MY ILO CURVE

1. Clean the Curve before use with ilo’s vibrator cleaner.

2. Press and hold the on/off button to turn on, the indicator light will flash 3 times. Immediately press the on/off button again to change vibrating patterns, 8 vibration patterns will cycle. 

3. Press the triangle button while vibrating, the first press will reset the device to the first vibration pattern, click again to pause vibrations. Press and hold the triangle button to increase the vibrating frequencies. The faster the frequencies are, the faster the indicator light will flash. The indicator light will stop flashing when you have reached the maximum frequency. 

4. Press the on/off button for 3 consecutive seconds to turn off.

5. Wash the Curve after use with ilo’s vibrator cleaner.

Charging time: 1.5 hours

Usage time: 3 hours

MY ILO EGG

1. Clean the egg before use with ilo’s vibrator cleaner.

2. Press and hold the on/off button for 3 consecutive seconds to turn on. Click the on/off button to change vibration patterns, 10 vibrating patterns will cycle. Massage and stimulate.

3. Press the on/off button for 3 consecutive seconds to turn off.

4. Wash the egg after use with ilo’s vibrator cleaner.

Charging time: 1 hour

Usage time: 1.5 hours

MY ILO REMO

1. Press and hold the on/off button for 3 continuous seconds to initiate power. A light will illuminate underneath the on/off button when the function has been correctly turned on and is ready for use. 

2. To change the vibration patterns, when using only the device, press the on/off button once again to initiate the patterns (do not continue to hold down on/off button as this will turn the device off). 9 vibration patterns will cycle.

3. To change the vibration patterns, when using the remote, press the on/off button until the light illuminates on the remote. Make sure the device is turned on (step 1). Press the secondary button to change vibration patterns. The remote will stay connected to the device up to 10m in distance. 

4. Massage and stimulate. 

5. Press and hold the on/off button for 5 continuous seconds, on both the device and remote, to turn off.

6. Wash Remo after use with My ilo’s vibrator cleaner.

Charging time: 1 hour

Usage time: 3 hours

MY ILO PLEASURE PLUG

1. Clean the plug before use with ilo’s vibrator cleaner.

2. Press and hold the on/off button for 5 consecutive seconds to turn on. Click the on/off button quickly to change the vibration patterns, 10 patterns will cycle. Massage and stimulate.

3. Press the on/off button for 5 consecutive seconds to turn off. 

4. Wash the plug after use with ilo’s vibrator cleaner.

Charging time: 1.5 hours

Usage time: 2 hours